[HAM] leslie amp safety

[Michael Casino]

Keep one hand in your pocket.
Discharge the filter capacitors in the power supply section.
Remove the multi can filter capacitor from it twist lock connector.
Check to see if single substitute power supply capacitors were installed.
If so discharge them.
Discharge all of them again.

<snip>

> If I am to replace the 6 pin plug on the amp input (122 in this case):
> 
> I have removed the amp from the leslie cabinet.
> I have removed all tubes.
> 
> What is the first safety step I should follow before disconnecting....
> and then resoldering a new plug ? 
> 
> Thanks in advance
> andrew